Full Suspension Carbon MTB Frame MFM100 is one of our best mountain bike frames, it is also a 21-inch frame mountain bike, the main thing is that it is a trail frameset; it is equipped with a Trunnion rear shock frame, internal alignment design, we deliberately offset the position of the rear shock, so that the structure of the bike can be smooth.
A carbon Bike is mainly a mid-to-high-end competition bicycle. As an emerging material, In addition to the chrome-molybdenum steel used in the past, carbon fiber materials also include aluminum, titanium, carbon fiber, magnesium, and other new materials.
Advantages:
The characteristics of carbon fiber frames are “light, good rigidity, and good shock absorption”. However, it is not technically easy to give full play to the excellent performance of carbon fiber, and the quality of carbon fiber material manufacturers varies greatly. Bicycle manufacturers are unlikely to use high-grade carbon fiber for frames due to cost concerns. Although there are the above-mentioned practical problems, the carbon fiber frame still has advantages that other materials do not have. It can manufacture a lightweight bicycle of about 8 or 9kg. This kind of carbon fiber lightweight bicycle can best reflect its advantages when climbing a slope, and the climbing is smooth. And refreshing. Unlike some light aluminum frames, there is a pull-back when climbing.
(1). Lightweight frame can be made
The carbon fiber frame is obtained by layering carbon fibers in the direction of stress to obtain strength. The carbon fiber frame is very light due to its density and strong tensile strength.
(2). Good shock absorption
Carbon fiber is used to make artificial legs for disabled people, or special springs are used in various fields. Utilize its excellent shock absorption performance to make bicycles without shock absorbers. However, the quality of each manufacturer varies greatly, and some are very hard, so this kind of frame can only know whether it is good or not after riding.
(3). Frames of various shapes can be manufactured
The basic molding method of carbon fiber is to lay fiber sheets on the mold and then flow into the resin and burn it. Frames can be made into various shapes.
Product features:
1. Boost gives a 148 x 12mm spacing which allows for the hub flanges to be further apart which gives a potentially stronger and stiffer rear wheel.
Our boost frame can fit a maximum 2.35″ size of tire. The boost design can increase the space of the chainstay, which can use larger and more speedy flywheels, the design of frog legs is more facilitate, and it also increases the elasticity of the rear fork, more shock absorption, and more comfortable.
2. Equipped with a Trunnion rear shock mount, bring us the most efficient pedaling design, asymmetric design, we deliberately offset the position of the rear shock, so that the structure of the bicycle can be smooth and the carbon fiber can perfectly achieve one Linear structure, and when the rear shock absorber is locked, the cable movement space on the left will be reserved, so that the down tube can be kept unblocked through the rear shock absorber to the main turning point.
3. Internal routing design to make your bicycle more beautiful and tidy
4. Has a good shock absorption effect and higher comfort. Whether off-road or competition, it can alleviate the fatigue of the rider.
5. 2-year warranty service.
For more info about carbon fiber MTB Frames, please check our official website: https://www.trifoxbike.com/